centos 7 编译安装 php-7.2.11的步骤
在官网下载php-7.2.11的php压缩包，centos 7 安装 php-7.2.11的步骤，http://cn2.php.net/distributions/php-7.2.11.tar.gz
cd /usr/local/srcwget -c http://cn2.php.net/distributions/php-7.2.11.tar.gz
下载好后解压 php-7.2.11.tar.gz 压缩包，并进入解压后的目录
tar -xzvf php-7.2.11.tar.gzcd php-7.2.11
安装php7需要的一些依赖库包 libxml2和一些其他依赖的扩展库
推荐（免费）：php7
yum -y install libxml2 yum -y install libxml2-devel yum -y install openssl yum -y install openssl-devel yum -y install curl-devel yum -y install libjpeg-devel yum -y install libpng-devel yum -y install freetype-develyum -y install bzip2-develyum -y install libmcrypt libmcrypt-develyum -y install postgresql-develyum -y install aspell-develyum -y install readline-develyum -y install libxslt-develyum -y install net-snmp-develyum -y install unixodbc-develyum -y install libicu-develyum -y install libc-client-develyum -y install libxpm-develyum -y install libvpx-develyum -y install enchant-develyum -y install openldapyum -y install openldap-develyum -y install db4-develyum -y install gmp-develyum -y install sqlite-develyum -y install mysql-devel
yum install oniguruma-devel -y
安装前的环境配置检查，php7的一些依赖包的检查和php扩展的启动，这个过程如果缺少php依赖的库包会有报错提示。
添加用户和组: (此处用户和组为 nginx, 我 nginx 用的用户名 ) groupadd -r nginx && useradd -r -g nginx -s /sbin/nologin
php 安装配置
请根据以下 a b c 选择合适的一项进行安装配置
a. php 7.2.10 单选模式
./configure --prefix=/usr/local/php --with-config-file-path=/usr/local/php/etc --enable-fpm --with-fpm-user=nginx --with-fpm-group=nginx --enable-inline-optimization --disable-debug --disable-rpath --enable-shared --enable-soap --with-xmlrpc --with-openssl --with-mcrypt --with-pcre-regex --with-sqlite3 --with-zlib --enable-bcmath --with-iconv --with-bz2 --enable-calendar --with-curl --with-cdb --enable-dom --enable-exif --enable-fileinfo --enable-filter --with-pcre-dir --enable-ftp --with-gd --with-openssl-dir --with-jpeg-dir --with-png-dir --with-freetype-dir --enable-gd-native-ttf --enable-gd-jis-conv --with-gettext --with-gmp --with-mhash --enable-json --enable-mbstring --enable-mbregex --enable-mbregex-backtrack --with-libmbfl --with-onig --enable-pdo --with-mysqli=mysqlnd --with-pdo-mysql=mysqlnd --with-zlib-dir --with-pdo-sqlite --with-readline --enable-session --enable-shmop --enable-simplexml --enable-sockets --enable-sysvmsg --enable-sysvsem --enable-sysvshm --enable-wddx --with-libxml-dir --with-xsl --enable-zip --enable-mysqlnd-compression-support --with-pear --enable-opcache
b. php 7.2.10 多行模式
./configure \--prefix=/usr/local/php \--with-config-file-path=/usr/local/php/etc \--enable-fpm \ --with-fpm-user=nginx \--with-fpm-group=nginx \ --enable-inline-optimization \--disable-debug \--disable-rpath \--enable-shared \--enable-soap \--with-xmlrpc \--with-openssl \--with-mcrypt \--with-pcre-regex \--with-sqlite3 \--with-zlib \--enable-bcmath \--with-iconv \--with-bz2 \--enable-calendar \--with-curl \--with-cdb \--enable-dom \--enable-exif \--enable-fileinfo \--enable-filter \--with-pcre-dir \--enable-ftp \--with-gd \--with-openssl-dir \--with-jpeg-dir \--with-png-dir \--with-freetype-dir \--enable-gd-native-ttf \--enable-gd-jis-conv \--with-gettext \--with-gmp \--with-mhash \--enable-json \--enable-mbstring \--enable-mbregex \--enable-mbregex-backtrack \--with-libmbfl \--with-onig \--enable-pdo \--with-mysqli=mysqlnd \--with-pdo-mysql=mysqlnd \--with-zlib-dir \--with-pdo-sqlite \--with-readline \--enable-session \--enable-shmop \--enable-simplexml \--enable-sockets \--enable-sysvmsg \--enable-sysvsem \--enable-sysvshm \--enable-wddx \--with-libxml-dir \--with-xsl \--enable-zip \--enable-mysqlnd-compression-support \--with-pear \--enable-opcache
c. php 7.4.10
./configure \--prefix=/usr/local/php \--with-config-file-path=/usr/local/php/etc \--enable-fpm \--with-fpm-user=nginx \--with-fpm-group=nginx \--enable-inline-optimization \--disable-debug \--disable-rpath \--enable-shared \--enable-soap \--with-xmlrpc \--with-openssl \--with-mcrypt \--with-pcre-regex \--with-sqlite3 \--with-zlib \--enable-bcmath \--with-iconv \--with-kerberos \--with-libdir=lib64 \--with-bz2 \--enable-calendar \--with-curl \--with-cdb \--enable-dom \--enable-exif \--enable-fileinfo \--enable-filter \--with-pcre-dir \--enable-ftp \--enable-gd \--with-openssl-dir \--with-jpeg-dir \--with-png-dir \--with-freetype-dir \--enable-gd-native-ttf \--enable-gd-jis-conv \--with-gettext \--with-gmp \--with-mhash \--enable-json \--enable-mbstring \--enable-mbregex \--enable-mbregex-backtrack \--with-libmbfl \--with-onig \--enable-pdo \--with-mysqli=mysqlnd \--with-pdo-mysql=mysqlnd \--with-zlib-dir \--with-pdo-sqlite \--with-readline \--enable-session \--enable-shmop \--enable-simplexml \--enable-sockets \--enable-sysvmsg \--enable-sysvsem \--enable-sysvshm \--enable-wddx \--with-libxml-dir \--with-xsl \--with-zip \--enable-xml \--enable-mysqlnd-compression-support \--with-pear \--enable-opcache \--enable-pcntl
从 php 7.4.0 开始，必须在编译 php 时用 --with-zip 配置选项来提供 zip 支持。之前的 php 版本，需要使用 --enable-zip 选项。
对php7进行编译和安装的操作
make && make install
( 如果出现 make: *** [sapi/cli/php] error 1 的错误，通过继续执行 make zend_extra_libs='-liconv' 命令解决
编译成功，查看php版本
/usr/local/php/bin/php -v
运行php-fpm
/usr/local/php/sbin/php-fpm
启动php-fpm可能会遇到的错误，基本都是配置文件配置和重命名的问题:
错误一：缺少www.conf配置文件（warning: nothing matches the include pattern /usr/local/php/etc/php-fpm.d/*.conf），需要把/usr/local/php/etc/php-fpm.d/*.conf目录中的www.conf.default重命名为www.conf。
错误二：缺少php-fpm.conf配置文件 需要在/usr/local/php/etc/php-fpm.conf 把默认的配置文件php-fpm.conf.default改成php-fpm.conf
错误三：缺少php.ini配置文件 php7编译安装好后会发现没有php.ini配置文件，需要在解压包的根目录中复制php.ini-production或php.ini-development并重命名为php.ini到php编译好的安装目录中的/usr/local/php/etc文件夹即可。
其它错误的解决:
error： package requirements (sqlite3 > 3.7.4) were not met
yum install libsqlite3x-devel -y
error: package requirements (oniguruma) were not met
yum install oniguruma-devel -y
当yum install 提示 "没可用软件包"
yum install -y epel-release
off_t undefined 报错
configure: error: off_t undefined; check your library configuration
configure: warning: unrecognized options: --with-mcrypt, --enable-gd-native-ttf
php7.2以后不支持–with-mcrypt, --enable-gd-native-ttf 这两个参数，需要去掉
在centos7中编译安装好php后，系统重启后并不会对php进行开机启动，所以需要对centos7添加开机启动脚本对php进行开机启动服务。
php7编译安装方法：http://zixuephp.net/article-207.html
手动启动：
/usr/local/php/sbin/php-fpm开机自动启动：
开启配置php-fpm pid
#找到php-fpm.conf配置文件/usr/local/php/etc/php-fpm.conf#开启pid ,去掉分号注释pid = run/php-fpm.pid 安装后要进行的操作:
1. 把安装目录下的 php.ini-development 复制到 /etc/ 目录下2. 修改 /usr/local/php/etc/php-fpm.conf.default 名为 php-fpm.conf 并进入修改3. 修改 /usr/local/php/etc/php-fpm.d/www.conf.default 为 www.conf 并进入修改
php 7.4.10 安装 zip
1 扩展包 wget https://pecl.php.net/get/zip-1.19.0.tgz 2 解压 并进入 tar -zxvf zip-1.19.0.tgz 2.2 cd zip-1.19.03 /usr/local/php/bin/phpize4 ./configure --with-php-config=/usr/local/php/bin/php-config 自己的php目录5 make && make install---------------------然后下载最新的,解压wget https://libzip.org/download/libzip-1.5.2.tar.gztar -zxvf libzip-1.5.2.tar.gz这时发现还要安装cmake，再去下载cmake：wget https://github.com/kitware/cmake/releases/download/v3.15.4/cmake-3.15.4.tar.gz解压：tar -zxvf cmake-3.15.4.tar.gz注意：cmake要按照文档安装./bootstrap && make && sudo make install漫长的等待，安装完成后，执行cmake -version出现版本号即表示cmake安装成功。接下来， 再进入 cd libzip-1.5.2mkdir build && cd build/cmake -dcmake_install_prefix=/usr/local/libzip ..makemake install//检测libzip是否安装成功whereis libzip libzip: /usr/local/libzip
创建开机启动脚本
在linux中将php-fpm配置成服务的方法
php 源文件路径: /usr/local/src/php-7.2.11/
php 安装后路径: /usr/local/php/
1、配置 php-fpm.conf
vim /usr/local/php/etc/php-fpm.conf
php-fpm.pid 目录必须指向：/usr/local/php/var/run/php-fpm.pid
2、拷贝php-fpm脚本至/etc/init.d目录
cp /usr/local/src/php-7.2.11/sapi/fpm/init.d.php-fpm /etc/init.d/php-fpm
#! /bin/sh### begin init info# provides: php-fpm# required-start: $remote_fs $network# required-stop: $remote_fs $network# default-start: 2 3 4 5# default-stop: 0 1 6# short-description: starts php-fpm# description: starts the php fastcgi process manager daemon### end init infoprefix=/usr/local/phpexec_prefix=${prefix}php_fpm_bin=${exec_prefix}/sbin/php-fpmphp_fpm_conf=${prefix}/etc/php-fpm.confphp_fpm_pid=${prefix}/var/run/php-fpm.pidphp_opts="--fpm-config $php_fpm_conf --pid $php_fpm_pid"wait_for_pid () { try=0 while test $try -lt 35 ; do case "$1" in 'created') if [ -f "$2" ] ; then try='' break fi ;; 'removed') if [ ! -f "$2" ] ; then try='' break fi ;; esac echo -n . try=`expr $try + 1` sleep 1 done}case "$1" in start) echo -n "starting php-fpm " $php_fpm_bin --daemonize $php_opts if [ "$?" != 0 ] ; then echo " failed" exit 1 fi wait_for_pid created $php_fpm_pid if [ -n "$try" ] ; then echo " failed" exit 1 else echo " done" fi ;; stop) echo -n "gracefully shutting down php-fpm " if [ ! -r $php_fpm_pid ] ; then echo "warning, no pid file found - php-fpm is not running ?" exit 1 fi kill -quit `cat $php_fpm_pid` wait_for_pid removed $php_fpm_pid if [ -n "$try" ] ; then echo " failed. use force-quit" exit 1 else echo " done" fi ;; status) if [ ! -r $php_fpm_pid ] ; then echo "php-fpm is stopped" exit 0 fi pid=`cat $php_fpm_pid` if ps -p $pid | grep -q $pid; then echo "php-fpm (pid $pid) is running..." else echo "php-fpm dead but pid file exists" fi ;; force-quit) echo -n "terminating php-fpm " if [ ! -r $php_fpm_pid ] ; then echo "warning, no pid file found - php-fpm is not running ?" exit 1 fi kill -term `cat $php_fpm_pid` wait_for_pid removed $php_fpm_pid if [ -n "$try" ] ; then echo " failed" exit 1 else echo " done" fi ;; restart) $0 stop $0 start ;; reload) echo -n "reload service php-fpm " if [ ! -r $php_fpm_pid ] ; then echo "warning, no pid file found - php-fpm is not running ?" exit 1 fi kill -usr2 `cat $php_fpm_pid` echo " done" ;; configtest) $php_fpm_bin -t ;; *) echo "usage: $0 {start|stop|force-quit|restart|reload|status|configtest}" exit 1 ;;esac
3、设置权限并启动php-fpm：
chmod 755 /etc/init.d/php-fpm
/etc/init.d/php-fpm start
chkconfig –add php-fpm
最后，给出php-fpm以服务的方式启动、停止和重启：
service php-fpm start
service php-fpm stop
service php-fpm reload
php-fpm 自启动配置服务:
vim /etc/rc.d/rc.local
查看开机启动的所有服务
chkconfig --list
nginx demo 配置:（不要忘记chown www-data:www-data 网站目录 不然没权限）
server { listen 80; server_name {{ server_name }}; access_log /data/logs/nginx/{{ server_name }}/access.log; error_log /data/logs/nginx/{{ server_name }}/error.log; location / { index index.php index.html index.htm; root /data/www/wwwroot/{{ server_name }}/; if (!-e $request_filename) { rewrite ^/(.*)$ /index.php; } } location ~ \.php$ { include fastcgi_params; fastcgi_pass unix:/tmp/php-fcgi.sock; fastcgi_index index.php; }}
php-fpm配置 (重命名两个文件 其他看实际情况配置(略。。。))
www.conf.default -> www.conf
php-fpm.conf.default -> php-fpm.conf
启动: php-fpm -d
nginx -s reload
以上就是讲解centos安装php7及配置php-fpm开机启动的详细内容。