西门子cpu416f-3pn/dp5.6m程序内存/5.6m数据内存
10 种不同 cpu，用于 s7-400
4 种 cpu，用于 s7-400h 和 s7-400f/fh
3 个故障安全 cpu，可用于 s7-400f
具有不同的性能等级，满足不同的应用领域
应用
simatic s7-400 可采用具有不同性能级别的各种 cpu：
cpu 412-1、cpu 412-2 和 cpu412-2 pn：
用于中等性能的小型工厂。
cpu 414-2、cpu 414-3、cpu 414-3 pn/dp：
用于具有对编程、处理速度和通信有额外要求的中等规模工厂。
cpu 416-2、cpu 416-3、cpu 416-3 pn/dp：
在性能范围内具有较高要求的工厂。
cpu 417-4 dp：
在性能范围内具有极严格要求的工厂。
cpu 412-5h、cpu 414-5h、cpu416-5h 和 cpu 417-4h：
用于 simatic s7-400h 和 s7-400f/fh。
cpu 414f-3 pn/dp、cpu 416f-2 和 cpu 416f-3 pn/dp：
用于构建故障安全型自动化系统，适用于具有较高安全要求的工厂。
9 种标准 cpu（cpu 412-1、cpu 412-2、cpu 414-2、cpu 414-3、cpu 414-3 pn/dp、cpu 416-2、cpu 416-3、cpu 416-3 pn/dp、cpu 417-4）3 个 cpu，适用于恶劣的环境条件具有不同的性能等级，满足不同的应用领域。应用不同性能范围的标准 cpu 可用于 simatic s7-400：
9 种标准 cpu（cpu 412-1、cpu 412-2、cpu 414-2、cpu 414-3、cpu 414-3 pn/dp、cpu 416-2、cpu 416-3、cpu 416-3 pn/dp、cpu 417-4）
3 个 cpu，适用于恶劣的环境条件
具有不同的性能等级，满足不同的应用领域。
应用
不同性能范围的标准 cpu 可用于 simatic s7-400：
cpu 412-1 和 cpu 412-2:
用于中等性能范围的小型设备。
cpu 414-2, cpu 414-3, cpu 414-3 pn/dp:
用于具有对编程、处理速度和通讯有额外要求的中型设备。
cpu 416-2, cpu 416-3, cpu 416-3 pn/dp:
满足性能要求。
cpu417-4 dp:
满足端的性能要求。
西门子cpu416f-3pn/dp5.6m程序内存/5.6m数据内存
6es7416-2xp07-0ab0
simatic s7-400，cpu 416-2, *处理器，带： 内存 8 mb， （4 mb 代码，4 mb 数据）， 1. 接口 mpi/dp 12 mbit/s， 第 2 个 profibus dp 接口
显示价格
6es7416-3es07-0ab0
simatic s7-400，cpu 416-3 pn/dp *处理器，带： 工作存储器 16 mb， （8 mb 代码，8 mb 数据）， 接口 第 1 个 mpi/dp 接口 12 mbit/s(x1)， 第 2 个以太网/profinet 接口(x5) 第 3 个 if 964-dp 接口可插拔(if1)
显示价格
6es7416-3xs07-0ab0
simatic s7-400，cpu 416-3, *处理器，带： 工作存储器 16 mb， （8 mb 代码，8 mb 数据）， 1. 接口 mpi/dp 12 mbit/s， 第 2 个 profibus dp 接口， 第 3 个 ss ifm 模块接口，可插拔
cpu 416-2, cpu 416-3 and cpu 416-3 pn/dp are powerful simatic s7-400 cpus.
the integrated profibus dp interfaces in the cpu 416-2 and cpu 416-3 make it possible to connect directly to the profibus dp fieldbus as a master or slave.
an additional dp master system can be connected to the cpu 416-3 and cpu 416-3 pn/dp using the if 964-dp interface module.
the integrated profinet interface of the cpu 416-3 pn/dp includes switch functionality when the ertec 400-asic is used. this forms the basis for providing two externally accessible profinet ports. in addition to hierarchical network topologies, this also enables the creation of line structures in the new s7-400 controllers.
note:
only the 6es7 964-2aa04-0ab0 interface submodule may be used.
设计both cpus are equipped with the following:
powerful processor:
the cpus achieve instruction execution times as low as 0.03 µs per binary instruction.cpu 416-2:5.6mb ram (of which 2.8 mb each for program and data);
cpu416-3:11.2 mb ram (of which 5.6 mb each for program and data);
cpu416-3 pn/dp:11.2 mb ram (of which 5.6 mb each for program and data);
fast ram for parts of the user program relevant to execution.flexible expansion:
up to 262144 digital and 16384 analog inputs/outputs.multi-point interface mpi:
with the mpi it is possible to establish simple networking of max. 32 stations at a data transmission rate of up to 12 mbit/s. the cpus can establish up to 44 connections to stations of the communications bus (c bus) and the mpi.mode selector switch:
designed as toggle switch.diagnostics buffer:
the last 120 fault and interrupt events are retained in a ring buffer for diagnostic purposes. the number of entries can be parameterized.real-time clock:
the date and time are appended to diagnostic messages of the cpu.memory card:
for expansion of the integrated load memory. ram and feprom cards (feprom for retentive storage) are availablecombined mpi/dp interface and integrated profibus dp interface (cpu 416-2andcpu 416-3):
the profibus dp master interface allows a distributed automation configuration offering high speed and ease of use. from the user's point of view, the distributed i/o is treated as central i/o (same configuring, addressing and programming).
mixed configuration: simatic s5 and simatic s7 as profibus master according to en 50170.cpu 416-3 and cpu 416-3 pn/dp also include:
a module slot:
an additional profibusdp master system can be connected via the if964-dp interface module.cpu 416-3 pn/dp additionally includes:
profinet interface with 2 ports (switch):profinet i/o, 256 io devices connectableprofinetcba
功能block protection:
a password concept protects the user program from unauthorized access.integral hmi services:
the user only has to specify the source and destination of the data with hmi devices. the data are then transported cyclically and automatically by the system.integrated communications functions:pg/op communicationshared data communications7 standard communications7 communicationfirmware update using networkcpu 416-3 pn/dpadditional:
open communication over tcp/ip, udp and iso-on-tcp (rfc1006)distributed intelligence in component based automation (cba) on profinetadditional diagnostic options with integrated web serverparameterizable attributes
the step 7 tool hardware configuration can be used to program the properties and response of the s7-400 including the cpus, e.g.
multi-point interface mpi:definition of station addresses.startup/cycle behaviorstipulation of the maximum cycle time and communications loadaddress assignment:
addressing of i/o modules.retentive ranges:
definition of the number of retentive bit memories, counters, timers, data blocks and clock memories.size of the process image, local data.length of the diagnostics bufferprotection level:
definition of access authorization for program and datasystem diagnostics:
definition of the handling and scope of diagnostic messagestimed interrupts:
setting of periodicitycpu 416-3 pn/dpadditional:
profinet interfaceparameterization of time synchronization using ntp procedureindication and information functions
status and error indicators:
leds indicate internal and external errors and operating states such as run, stop, restart, test function, for exampletest functions:
the programming device can be used to display signal states in program execution, modify process tags irrespective of the user program, read out the contents of stack memories, run separate program steps and inhibit program componentsinformation functions:
the programming device can be used to provide the user with information on the memory capacity and operating mode of the cpu and the current utilization of the working and load memories
6es7901-0bf00-0aa0
simatic s7，mpi 电缆 用于连接 simatic s7 和 pg（通过 mpi） 5m
显示价格
6es7912-0aa00-0aa0
simatic s7，安装位置标牌
显示价格
6es7952-0af00-0aa0
simatic s7，ram 存储卡 针对 s7-400，长结构形式， 64 kbyte
显示价格
6es7952-0kf00-0aa0
simatic s7，存储卡 针对 s7-400，长结构形式， 5v 闪存 eprom，64 kbyte
显示价格
6es7952-0kh00-0aa0
simatic s7，存储卡 针对 s7-400，长结构形式， 5v 闪存 eprom，256 kbyte
显示价格
6es7952-1ah00-0aa0
simatic s7，ram 存储卡 针对 s7-400，长结构形式， 256 kbyte
显示价格
6es7952-1ak00-0aa0
simatic s7，ram 存储卡 针对 s7-400，长结构形式， 1 mbyte
显示价格
6es7952-1al00-0aa0
simatic s7，ram 存储卡 针对 s7-400，长结构形式， 2 mbyte
显示价格
6es7952-1am00-0aa0
simatic s7，ram 存储卡 针对 s7-400，长结构形式， 4 mbyte
显示价格
6es7952-1ap00-0aa0
simatic s7，ram 存储卡 针对 s7-400，长结构形式， 8 mbyte
6es7416-2xp07-0ab0
simatic s7-400，cpu 416-2, *处理器，带： 内存 8 mb， （4 mb 代码，4 mb 数据）， 1. 接口 mpi/dp 12 mbit/s， 第 2 个 profibus dp 接口
显示价格
6es7416-3es07-0ab0
simatic s7-400，cpu 416-3 pn/dp *处理器，带： 工作存储器 16 mb， （8 mb 代码，8 mb 数据）， 接口 第 1 个 mpi/dp 接口 12 mbit/s(x1)， 第 2 个以太网/profinet 接口(x5) 第 3 个 if 964-dp 接口可插拔(if1)
显示价格
6es7416-3xs07-0ab0
simatic s7-400，cpu 416-3, *处理器，带： 工作存储器 16 mb， （8 mb 代码，8 mb 数据）， 1. 接口 mpi/dp 12 mbit/s， 第 2 个 profibus dp 接口， 第 3 个 ss ifm 模块接口，可插拔