you must pay attention to the relevant details during the use of the micro switch, so that it is safe to use. the following micro switch manufacturers will tell you about the details of use.
1. for the application of the micro switch in the harsh and humid environment, the sealed micro switch of the temperature range must be selected, and the waterproof level of the micro switch must also reach ip6 level, otherwise the moisture in the humid air will easily cause it the components of the switch are damp, which will affect the performance of the switch.
4. during the work of the micro switch, please do not set the operating body to the switch's operating limit position, so as to avoid the impact of the opening and closing and over-travel which will affect the shortening of the service life of the switch. and the action body of the micro switch in the free state should not directly apply force to the button, and applying force in the vertical direction of the button of the switch during use will cause damage to the switch.
3. when selecting a micro switch, please consider whether the size, load requirements, working environment and reliability of the switch meet the requirements of the equipment, otherwise, the micro switch is randomly used, and whether the required rated power is low voltage application? questions such as whether the switch needs to be sealed, etc., are all situations that can easily cause the switch to malfunction.
2. secondly, it is about changing the geometric structure, clamping mode, contact size, etc. of the internal components of the micro switch, so it will also change the pressure distribution and contact mode at the contact surface. in general, the use of micro-switches will also lead to the performance of resisting micro-movement damage. therefore, it is generally not required by special circumstances, please do not disturb and change the internal component structure of the switch casually.
5. in the low-voltage rectifier and filter circuit of the micro switch, the pulsating voltage after the high-frequency transformer step-down is also used for rectification and filtering with diodes and capacitors, and the capacitor used in the rectification part must not have too much ac impedance, otherwise it will not filter out the high-frequency ac component, otherwise the micro switch will not be able to withstａnd the high-frequency excessive current, which will cause damage to the switch.