prosoft plx31-eip-mbtcp通信模块
prosoft plx31-eip-mbtcp通信模块
※※※ 深圳市扎克贸易有限公司
※※※ 张瑞 188-24-24-3080（v同）
ethernet/ip to modbus tcp/ipplx31-eip-mbtcpprosoft technology’s ethernet/ip™ to modbus® tcp/ip communication gateway allows high-speed bi-directional data transfers between ethernet/ip™ enabled controllers or devices and modbus® tcp/ip controllers or devices.
our modbus® tcp/ip driver features multiple client and server functionality, for faster data transmission. in addition, the gateway includes several features, including data prioritization, that allow for simplified integration, reduced commissioning time and optimized performance.
a conformal coating option is available for this product.
specificationsethernet/ip™ specifications
specification
description
number of class 3 server connections
5
supported plc types
plc2, plc5, slc, clx, cmplx, microlx
supported message types
pccc and cip
class 3 client connections
connected: 2unconnected: 1
number of class 1 i/o connections
2
i/o connection sizes
248/248
max rpi time
5 ms per connection
cip services supported
0x4c - cip data table read0x4d - cip data table writecip generic
command list
support for 100 commands per client, each configurable for command type, ip address, register to/from addressing and word/bit count.
command sets
plc-2/plc-3/plc5 basic command setplc5 binary command setplc5 ascii command setslc500 command set
modbus® tcp/ip specifications
specification
description
supported modbus function codes
1: read coil status2: read input status3: read holding registers4: read input registers5: force (write) single coil6: preset (write) single holding register15: force (write) multiple coils16: preset (write) multiple holding registers22: mask write holding register (slave only)23: read/write holding registers (slave only)
supported clients
10
supported servers
mbap: 5encapsulated: 5
command list
up to 160 fully configurable client commands
status data
error codes reported individually for each command
command list polling
each command can be individually enabled or disabled; write-only-on-data-change is available